staffhasem.blogg.se - Sun fire x4150 review

#SUN FIRE X4150 REVIEW UPDATE#
#SUN FIRE X4150 REVIEW SOFTWARE#

Not supported (not a board issue) or where we have no report in theĭiff -git a/board_enable.c b/board_enable.

#SUN FIRE X4150 REVIEW UPDATE#

Update bad board list and remove boards where either the chipset is

WF 2, jfolla: sent to submitter with questionsĪttachments This solution has no attachmentĬopyright © 2012 Sun Microsystems, Inc. SVS (SPARC Volume Systems, Horizontal Systems (includes T2000/Ontario), NWS (Network Storage), Systems Group-圆4 (X4100-X4600 (includes M2), V20z/V40z/V60z/V65z, Ultra20/40) Internal Eng Responsible Services Knowledge Engineer Please send technical questions to the following email: Until the error goes away or you see a persistent DIMM mapping out and If a different dimm maps out you should continue to reboot the system.If the same DIMM maps out there is likely a bad Dimm DIMM and the DIMM pair should be replaced.The Dimm error goes away indicating the issue was due to a correctable ECC memory error at which point everything is fine. IT / Technology Services of Sun Servers - Sun Fire X4150 (P/N : 4326709-43), Sun X4270 Server, Sun Netra240 and Networking Server (Sun Fire V240) offered by Rr Global Systems, Bengaluru, Karnataka.If during POST a DIMM is mapped out, the system should be rebooted to determine if the mapped out DIMM is due to a correctable ECC memory error at which point three things could happen: POST should not map out a DIMM due to detecting a correctable ECC memory error.

#SUN FIRE X4150 REVIEW SOFTWARE#

This will be fixed in the next software release and both types will be reported as a minor correctable ECC.ĭimms being falsely mapped out during POST due to correctable ECC memory errors. A scrubber correctable ECC memory error is not a critical despite the SEL entry. This incorrectly indicates the error as critical. If the background scrubber the correctable ECC memory error, the SEL entry will look like this: If a correctable ECC memory error is detected by the CPU, you will see this SEL entry as usual:

There are 2 other known issues that are being fixed in the next (3.1.0) software release: It is recommended to update affected systems with the latest BIOSĬontain BIOS 1ADQW062 for the Sun Fire X4150/X4250 and BIOS 3B62 forĢ: Maintenance check for relevance/currency, no change in content

Sun Fire X4150/X4250/X4450 systems with BIOS revision 3.0.2 or.

This issue is addressed on the following platforms: If the described issue occurs, the system will lock up/hang with no Occurs, when it occurs, how it is detected, and the operating system Likelihood of a system hang due to this bug is based on if an error VMWare 3.5, 4.0 and RHEL 5.3 are known to encounter this hang conditionīecause they will pass patrol scrub correctable errors on to the BIOS.Ģ: Correctable errors can occur even in healthy systems.

Ways they can handle a patrol scrub detected correctable memory error. This bug does not affect all operating systems due to the different The system will lockup with no ILOM SEL entry indicating the problem. Patrol scrub detected correctable ECC memory error. Management Interrupt) handler will never exit when it tries to handle a With BIOS versions 3B61 or earlier have an issue where the SMI (System X4250 servers with BIOS versions 1ADQW061 or earlier and X4450 servers This issue can occur on the following platforms: Sun Fire X4150/X4250/X4450 systems with BIOS versions 3.0.1 orĮarlier may hang as a result of correctable ECC memory errors not Sun Fire x4150/X4250/x4450 systems may hang as a result of correctable ECC memory errors: Old GCS Categories>Sun Microsystems>Sun Alert>Release Phase>Resolved PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: Sun Alert.